Automated Control System of Manipulator Pump, Used in Technological Process of Blank Forging and Hot Stamping

Fardeyev A.A.

Abstract


In order to increase the production efficiency, it is suggested to introduce a manipulator into the existing technological process of blank forging and hot stamping. The paper describes the developed system of this manipulator pump displacement control with simultaneous application of the relief valve, thus reducing the company energy consumption.

Keywords


technological process; forging; hot stamping; manipulator; automation; control; displacement pump

References References

Промышленные роботы: конструирование, управление, эксплуатация / В. И. Костюк [и др.]. – Киев : Вища шк. Головное изд-во, 1985. – 359 с.

Попов Е. П., Письменный Г. В. Основы робототехники : введ. в спец. – М. : Высш. шк., 1990. – 224 с.

Воронов А. А. Теория автоматического управления. – М. : Высш. шк., 1986. – 368 с.

Башта Т. М. Гидропривод и гидропневмоавтоматика. – М. : Машиностроение, 1972. – 320 с.


Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM


Copyright (c) 2013 Bulletin of Kalashnikov ISTU

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

ISSN 1813-7903 (Print)
ISSN 2413-1172 (Online)