Experimental Investigation of Bearing Capacity of Interference Fit Loaded With Bending Moment and Rotation

Abramov I.V., Abramov A.I., Sinitsyn A.N., Sinitsyna V.V.

Abstract


Effect of self-disassembling of interference fit loaded with bending moment and rotation is experimentally investigated. Influence of coupling length on bearing capacity of interference fit loaded with bending moment research results are presented in this paper.

Keywords


interference fit; bearing capacity; bending moment; self-disassembling

References References

Напряженно-деформированное состояние деталей соединения с натягом под действием изгибающего момента / И. В. Абрамов [и др.] // Вестник машиностроения. - 2010. - № 8. - С. 18-21.

Bending moment and rotating frequency influence on interference fit bearing capacity / I. V. Abramov [et al.] // University Review. - 2011. - Vol. 5. - No. 1. - P. 24-28.

Experimental plant for interference fit disassembling / I. V. Abramov [et al.] // Mechatronika-2011 : 14th International Symposium. - 2011. - P. 90-92.


Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM


Copyright (c) 2012 Bulletin of Kalashnikov ISTU

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


ISSN 1813-7903 (Print)
ISSN 2413-1172 (Online)