The Heat Exchange Intensification in a Cutting Zone at Cavitation Process of Movement

Authors

  • G. K. Yusupov Votkinsk Branch of Izhevsk State Technical University
  • S. А. Kolegov Votkinsk Branch of Izhevsk State Technical University

Keywords:

abrasive, diamond, tool, cavitation, apertures, cutting, Laval nozzle

Abstract

The process of lubricating and cooling fluid movement through the apertures made in the form of Leval nozzle, connecting an internal cavity of a grinding circle with a working surface is investigated. It is established that the given design allows performing grinding in a low-temperature mode.

Author Biographies

G. K. Yusupov, Votkinsk Branch of Izhevsk State Technical University

; Votkinsk Branch of Izhevsk State Technical University

S. А. Kolegov, Votkinsk Branch of Izhevsk State Technical University

; Votkinsk Branch of Izhevsk State Technical University

References

Башта Т. М. Машиностроительная гидравлика. - М. : Машиностроение, 1971. - 672 с.

Юсупов Г. Х. Постановка задачи оптимального проектирования высокопроизводительного АШК // Методы вычислительного эксперимента в инженерной практике : сб. науч. тр. ИМИ. - Ижевск, 1992. - Вып. 3. - С. 37-39.

Downloads

Published

15.03.2010

How to Cite

Yusupov Г. Х., & Kolegov С. А. (2010). The Heat Exchange Intensification in a Cutting Zone at Cavitation Process of Movement. Intellekt. Sist. Proizv., 5(1), 210–214. Retrieved from https://izdat.istu.ru/index.php/ISM/article/view/1256

Issue

No. 1 (2010)

Section

Articles