Application of cold as a method of widening technological possibilities of rigging
Keywords:
grinding, cooling, electromagnetic device, accuracy, heat sinkAbstract
The paper considers the method of cooling of the electromagnetic rigging applied at finish flat grinding of parts by direct removal of heat both from the inner part of the rigging and from its outer surface. Application of internal cooling allows reducing the value of thermal strain both of the machined flat part by heat sink intensification through the mounting surface, and of the rigging itself by supplying the coolant through the inner coil pipe. As a result the machining accuracy is increased and higher quality of machined parts is ensured.References
Верников А. Я. Магнитные и электромагнитные приспособления в металлообработке. – М. : Машиностроение, 1984. – 160 с.
Справочник технолога-машиностроителя : в 2 т. / под ред. А. М. Дальского, А. Г. Суслова, А. Г. Косиловой, Р. К. Мещерякова. – 5-е изд., перераб. и доп. – М. : Машиностроение-1, 2001. – Т. 1. – 912 с. ; Т. 2. – 944 с.
Tanuška, P., Vlkovič, O., Špendla, L. The Proposal of Step Stress Testing Automation // International Journal of Computer Theory and Engineering. – 2010. – Vol. 2, Nr 6. – Pp. 860-865.
The Proposal of Ontology as a Part of University Data Warehouse / P. Tanuška, O. Vlkovič, A. Vorstermans et al. // ICETC 2010 : 2nd International Conference on Education Technology and Computer. 22-24, June, 2010, Shanghai, China. Vol. 1. - : IEEE, 2010. - ISBN 978-1-4244-6369-5. - V3-21/V3-24.
