ВЛИЯНИЕ СТРУКТУРНОГО СТРОЕНИЯ ВЫСОКОТВЕРДОГО ПОРОШКОВОГО МАТЕРИАЛА НА СИЛЫ РЕЗАНИЯ ПРИ БЕСЦЕНТРОВОМ НАРУЖНОМ ШЛИФОВАНИИ

V. I. Svirshchev; V. K. Flegentov; I. V. Podbornov; A. V. Trubitsyn

Authors

V. I. Svirshchev Perm National Research Polytechnic University
V. K. Flegentov CJSC “Novomet-Perm”
I. V. Podbornov CJSC “Novomet-Perm”
A. V. Trubitsyn CJSC “Novomet-Perm”, Perm National Research Polytechnic University

Keywords:

very hard material "Relit", centerless grinding, cutting force

Abstract

The paper considers the method of accounting the influence of structural composition of a very hard powder material within the problem of calculating the cutting forces at external centerless grinding. The analytical expression for force calculation is obtained, the calculation example is given.

Author Biographies

V. I. Svirshchev, Perm National Research Polytechnic University

DSc in Engineering, Professor

V. K. Flegentov, CJSC “Novomet-Perm”

PhD in Engineering, Production Director

I. V. Podbornov, CJSC “Novomet-Perm”

PhD in Engineering, Deputy Director of Production Prearation

A. V. Trubitsyn, CJSC “Novomet-Perm”, Perm National Research Polytechnic University

Post-graduate, process engineer

References

Евсеев Д. Г., Сальников А. Н. Физические основы процесса шлифования. – Саратов : Изд-во Сарат. ун-та, 1978. – 128 с.

Свирщев В. И., Флегентов В. К., Подборнов И. В. Аналитическое описание и расчет сил резания при бесцентровом наружном шлифовании // Вестн. ПГТУ. Механика и технология материалов и конструкций. – 2002. – № 5. – С. 180–187.