Investigation of cables geometry influence on measurement repeatability of electromagnetic compatibility tests

Authors

  • I. Gallon Slovak Technical University
  • R. Gartyanski Slovak Technical University
  • К. Кovach Slovak Technical University
  • L. Marshalka Slovak Technical University
  • Y. L. Кaravaev Izhevsk State Technical University

Keywords:

electromagnetic compatibility, mutual impedance of transmission line, moment method, common mode current measurement

Abstract

The analysis of cables mutual influence during their electromagnetic-compatibility tests is considered.

Author Biographies

I. Gallon, Slovak Technical University

кандидат технических наук; Словацкий технический университет; Slovak Technical University

R. Gartyanski, Slovak Technical University

кандидат технических наук, доцент; Словацкий технический университет; Slovak Technical University

К. Кovach, Slovak Technical University

кандидат технических наук, доцент; Словацкий технический университет; Slovak Technical University

L. Marshalka, Slovak Technical University

аспирант; Словацкий технический университет; Slovak Technical University

Y. L. Кaravaev, Izhevsk State Technical University

Izhevsk State Technical University

References

EN 61000-4-3 Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test.

Там же.

Balanis, A. C. Antenna Theory Analysis and Design / A. C. Balanis. - New York : Harper & Row, 1982. - 941 p.

Там же.

Bittera M. Some Aspects of Radiated Emission Measurement. - Bratislava : STU, 2007.

Influence of Interface Cables Termination Impedance on Radiated Emission Measurement [Text] / M. Bittera, V. Smiesko // Measurement Science Review - 2010. - No 5. - P. 157-161. - ISSN 1335-8871.

EN 61000-4-3 Electromagnetic compatibility (EMC).

Там же.

Анализ устойчивости длинных кабелей к радиочастотным электромагнитным полям - теоретический подход / М. Битера [и др.] // Вестник Ижевского государственного технического университета <http://elibrary.ru/issues.asp?id=9625&selid=641496>. - 2010. - № 3.

Published

15.06.2011

How to Cite

Gallon Й., Gartyanski Р., Кovach К., Marshalka Л., & Кaravaev Ю. Л. (2011). Investigation of cables geometry influence on measurement repeatability of electromagnetic compatibility tests. Intellekt. Sist. Proizv., 6(2), 194–199. Retrieved from https://izdat.istu.ru/index.php/ISM/article/view/1381

Issue

Section

Articles