Technological maintenance of optimal characteristics of the adhesive joint of a resonator cavity and a base of the solid-state wave gyro

Authors

  • A. A. Luzhbina Kalashnikov Izhevsk State Technical University
  • Y. V. Turygin Kalashnikov Izhevsk State Technical University

Keywords:

solid-state wave gyro, adhesive joint, resonator, base, finite element method

Abstract

The urgency of the problem of ensuring the optimum characteristics of the adhesive joint of the resonator and the base of the solid-state wave gyro is determined. The flat contact problem is solved by finite element method. Conclusions are made about the magnitude of stresses and their distribution along the length of the adhesive layer.

Author Biographies

A. A. Luzhbina, Kalashnikov Izhevsk State Technical University

Post-graduate

Y. V. Turygin, Kalashnikov Izhevsk State Technical University

DSc in Engineering, Professor

References

Журавлев В. Ф., Климов Д. В. Волновой твердотельный гироскоп. - М. : Наука, 1985. - 125 с.

Лужбина А. А., Турыгин Ю. В. Технологические погрешности изготовления резонатора твердотельного волнового гироскопа // Сборник трудов II Всероссийской научно-технической конференции аспирантов, магистрантов и молодых ученых с международным участием. - Ижевск : Изд-во ИжГТУ, 2013. - С. 958-963.

Басов К. А. ANSYS : справочник пользователя. - М. : ДМКПресс, 2005. - 640 с.

Downloads

Published

15.03.2014

How to Cite

Luzhbina А. А., & Turygin Ю. В. (2014). Technological maintenance of optimal characteristics of the adhesive joint of a resonator cavity and a base of the solid-state wave gyro. Intellekt. Sist. Proizv., (1), 62–63. Retrieved from https://izdat.istu.ru/index.php/ISM/article/view/1526

Issue

No. 1 (2014)

Section

Articles