IDENTIFICATION OF THE OBJECTS BASED ON THE ANALYSIS OF THE MAGNETIC SIGNATURES

J Suriansky; M Porubsky

Authors

J. Suriansky Katedra informatiky a automatizacnej techniky, Fakulta environmentalnej a vyrobnej techniky TU vo Zvolene
M. Porubsky Katedra informatiky a automatizacnej techniky, Fakulta environmentalnej a vyrobnej techniky TU vo Zvolene

Abstract

The measuring, control and evaluation system for measuring and analysis of the magnetic signatures of objects is described in this article. A first part of the article is focused on the measuring system based on sensor HMR2300. A second part of the article contains a description of the control and evaluation system for analysis of the measured sensor data. At the conclusion of the article an experiences and improvement tips concerned with measurement system are presented.

Author Biographies

J. Suriansky, Katedra informatiky a automatizacnej techniky, Fakulta environmentalnej a vyrobnej techniky TU vo Zvolene

Katedra informatiky a automatizacnej techniky, Fakulta environmentalnej a vyrobnej techniky TU vo Zvolene

M. Porubsky, Katedra informatiky a automatizacnej techniky, Fakulta environmentalnej a vyrobnej techniky TU vo Zvolene

Katedra informatiky a automatizacnej techniky, Fakulta environmentalnej a vyrobnej techniky TU vo Zvolene

References

Tirpak, A. Elektromagnetizmus, Univerzita Komenskeho, Bratislava. - Bratislava 2004. - ISBN 80-88780-26-8.

Smart Digital Magnetometer, Solid 12001 State Highway 55, Plymounth State Electronics Center.

- and 2 - Axis Magnetic Sensors, Solid State Electronics Center, 12001 State Highway 55, Plymounth, MN 55441.

Virius, M. C++ Builder 5.0 - podrobny pruvodce, Grada 2005.

Porubsky, M. Moznosti vyuzitia magnetorezistivnych senzorov na meranie stacionarneho magnetickeho pola / M. Porubsky, J. Suriansky, A. Adamec // III. vedecka konferencia s medzinarodnou ucastou, Zvolen, jun 2007.

Porubsky, M. Possibilities of Magnetoresistive Sensors Sensitivity Increase / M. Porubsky, J. Suriansky, A. Adamec // Internacional workshop control and information technology, Ostrava, September 2007. P. 221. - ISBN 978-80-248-1567-1.