РАЗРАБОТКА ГЕОМЕТРИЧЕСКОЙ МОДЕЛИ КАНАТА ДВОЙНОЙ СВИВКИ  ДЛЯ ЧИСЛЕННОГО АНАЛИЗА

E. A. Kalentyev; V. V. Tarasov; V. N. Novikov; V. Yu. Puzanov; A. G. Bazhin

Authors

E. A. Kalentyev Institute of Mechanics, Ural Branch RAS, Izhevsk
V. V. Tarasov Institute of Mechanics, Ural Branch RAS, Izhevsk
V. N. Novikov Izhevsk State Agricultural Academy
V. Y. Puzanov Kalashnikov Izhevsk State Technical University
A. G. Bazhin Kalashnikov Izhevsk State Technical University

Keywords:

geometric model, double lay rope, numerical analysis

Abstract

The paper presents a methodology for the development of the geometric model of a double lay rope used for the numerical analysis of the stress-strain state and the study of mutual displacements of rope elements.

Author Biographies

E. A. Kalentyev, Institute of Mechanics, Ural Branch RAS, Izhevsk

PhD in Engineering

V. V. Tarasov, Institute of Mechanics, Ural Branch RAS, Izhevsk

DSc in Engineering, Professor

V. N. Novikov, Izhevsk State Agricultural Academy

V. Y. Puzanov, Kalashnikov Izhevsk State Technical University

PhD in Engineering, Associate Professor

References

Manuel Munoz Hardy. Geometric transformation for double helical wire rods; A thesis submitted to the graduate division of the university of Hawaii in partial fulfillment of the requirements for the degree of master of science in mechanical ingineering. 51p.

Талтыкин В. С. Обоснование метода повышения долговечности шахтных канатов с учетом контактного взаимодействия проволок : автореф. дисс. … канд. техн. наук. – М., 2009. – 23 с.

Cengiz Erdonmez, C. Erdem İmrak. A finite element model for independent wire rope core with double helical geometry subjected to axial loads // Indian Academy of Sciences, 2011. – Vol. 36. – № 6. – P. 995–1008.

Cengiz Erdonmez, C. Erdem İmrak. Advances in 3D wire rope modeling and numerical analysis // The International Journal of TRANSPORT & LOGISTICS. 2010. – Vol. 10. – P. 57–62.

Usabiaga H., Pagalday J. M. Analytical procedure for modelling recursively and wire by wire stranded ropes subjected to traction and torsion loads // International Journal of Solids and Structures, 2008. – Vol. 45. – P. 5503–5520.

Stanova E., Fedorko G., Fabian M., Kmet S. Computer modelling of wire strands and ropes Part I: Theory and computer implementation // Advances in Engineering Software. 2011. – Vol. 42. – P. 305–315.

MA Jun, GE Shi-rong, ZHANG De-kun. Distribution of wire deformation within strands of wire ropes // J China Univ Mining & Technol. 2008. – Vol. 18. – P. 0475–0478.

Wen-Guang Jiang, Michael K. Warby, John L. Henshall. Statically indeterminate contacts in axially loaded wire strand // European Journal of Mechanics A/Solids. 2008. – Vol. 27. – P. 69–78.

Páczelt I., Beleznai R. Nonlinear contact-theory for analysis of wire rope strand using high-order approximation in the FEM // Computers and Structures. 2011. – Vol. 89. – P. 1004–1025.

Chang Huang and Knapp R. H. Parametric Modeling of Double and Triple Helical Strands // Proceedings of the Sixteenth (2006) International Offshore and Polar Engineering Conference, San Francisco, California, USA, May 28-June 2, 2006.

Seyed Reza Ghoreishia,Tanguy Messagera, Patrice Cartrauda and Peter Daviesc. Validity and limitations of linear analytical models for steel wire strands under axial loading, using a 3D FE model // International Journal of Mechanical Sciences. 2007. – Vol. 49. I. 11. – P. 1251–1261.

Глушко М. Ф. Стальные подъемные канаты. – Киев : Техника, 1966. – 327 с.