Method of iterative variation of constants in three-component vector-measuring transducers

Authors

  • T. A. Redkina Kalashnikov Izhevsk State Technical University
  • D. G. Milovzorov Ufa State Aviation Technical University
  • R. R. Sadrutdinov OJSC "NPF "Geophysics", Ufa
  • E. S. Morozova Ufa State Aviation Technical University

Keywords:

vector-measuring transducers, iterative method

Abstract

The paper considers three-component vector-measuring transducers and methods of algorithmic correction of their instrumental errors, defined by constants that characterize a particular spatial positioning of the transducers in the unit casing. The technique is offered for refining the numerical values of constants defined at calibration stages by their iterative variation according to scientifically based criteria.

Author Biographies

T. A. Redkina, Kalashnikov Izhevsk State Technical University

Senior Lecturer

D. G. Milovzorov, Ufa State Aviation Technical University

PhD in Engineering, Associate Professor

R. R. Sadrutdinov, OJSC "NPF "Geophysics", Ufa

Director General

E. S. Morozova, Ufa State Aviation Technical University

Senior Lecturer

References

Голдстейн Г. Классическая механика. – М. : Наука, 1975. – 415 с.

Миловзоров Г. В. Анализ инструментальных погрешностей инклинометрических устройств. – Уфа : Гилем,1997. – 184 с.

Миловзоров Г. В., Зигангиров Л. Р., Миловзоров Д. Г. Векторно-матричный аппарат в моделировании трехкомпонентных инклинометрических систем // Датчики и системы. – 2011. – № 7. – С. 30–34.

Downloads

Published

25.12.2014

How to Cite

Redkina Т. А., Milovzorov Д. Г., Sadrutdinov Р. Р., & Morozova Е. С. (2014). Method of iterative variation of constants in three-component vector-measuring transducers. Intellekt. Sist. Proizv., 2(2), 138–143. Retrieved from https://izdat.istu.ru/index.php/ISM/article/view/1885

Issue

No. 2 (2014)

Section

Device engineering, metrology, measuring equipment and systems