To estimation of strategies for machining the operating surfaces of stamp tooling by means of CAM systems according to criterion of volume velocity of material removal

Authors

  • Y. V. Puzanov Kalashnikov ISTU
  • I. A. Pechenkin Kalashnikov ISTU
  • A. G. Bazhin Kalashnikov ISTU
  • V. Y. Puzanov Kalashnikov ISTU
  • V. V. Nekopytkin Kalashnikov ISTU
  • V. V. Golikov Kalashnikov ISTU

Keywords:

control program, CAM-systems, volume velocity of material removal, strategies for machining, smoothing the trajectory of tool displacement

Abstract

The paper describes the ways of developing the most sustainable control programs by means of CAM systems. Its sustainability is achieved according to the value of volume velocity of material removal. The influence of applying the proposed control programs on manufacturability and tool wear is described.

Author Biographies

Y. V. Puzanov, Kalashnikov ISTU

PhD in Engineering

I. A. Pechenkin, Kalashnikov ISTU

Post-graduate

A. G. Bazhin, Kalashnikov ISTU

Senior Lecturer

V. Y. Puzanov, Kalashnikov ISTU

PhD in Engineering

V. V. Nekopytkin, Kalashnikov ISTU

лаборант

V. V. Golikov, Kalashnikov ISTU

Post-graduate

References

Bazhin A. G. Hardware and software complex development of processing of precisely conjugated parts based on the Delcam modules / A. G. Bazhin, I. A. Pechenkin, Yu. V. Puzanov // Universology: definitions, issues and concepts [the electronic resourse] : the electronic scientific publication: proceedingsfrom the Teachers' Technical Scientific Conference (in the English language), Izhevsk, 27June 2013 y. / Kalashnikov Izhevsk State Technical University. -Electronic data (1file : 3,18Mb.).-Izhevsk, 2013. -64pp. -1 electronic disk (CD-ROM). - System requirements: Acrobat Reader 6.0 and on. - ISBN 978-5-7526-0654-0.

Delcam. - URL:http://www.delcam.ru/products/ products.htm (дата обращения: 26.10.2014).

Downloads

Published

18.01.2016

How to Cite

Puzanov Ю. В., Pechenkin И. А., Bazhin А. Г., Puzanov В. Ю., Nekopytkin В. В., & Golikov В. В. (2016). To estimation of strategies for machining the operating surfaces of stamp tooling by means of CAM systems according to criterion of volume velocity of material removal. Intellekt. Sist. Proizv., 13(3), 35–38. Retrieved from https://izdat.istu.ru/index.php/ISM/article/view/3096

Issue

Vol. 13 No. 3 (2015)

Section

Energy, metallurgical and chemical engineering