Расчетное определение коэффициента пропускной способности запорной арматуры

M N Karakulov; I I Holova; A D Holov

doi:10.22213/2413-1172-2022-3-32-37

Authors

M. N. Karakulov Votkinsk branch of Kalashnikov ISTU
I. I. Holova Trading House Votkinsk Factory Ltd
A. D. Holov Votkinsk Factory Ltd

DOI:

https://doi.org/10.22213/2413-1172-2022-3-32-37

Keywords:

throughput coefficient, shut-off valve, wedge gate valve, coefficients of local resistance

Abstract

The current level of industry development for the gas and oil production of equipment requires the development of engineering methods for calculating the hydraulic characteristics of manufactured products. Due to the complexity of the designs of distribution and control units for oil and gas transportation networks, the hydraulic characteristics of their control components increasingly affect the performance of regulation. In the construction of distribution and control units, pipeline fittings are used, in particular, wedge gate valves and shut-off valves. One of the main hydraulic characteristics of these products is the throughput, which is assessed by the throughput coefficient. Therefore, now the design engineer needs simple and accurate methods to determine the theoretical value of the throughput coefficient at the design stages of the product. The throughput is related to the hydraulic resistance of the passage part of the pipeline fittings, because it affects the level of pressure reduction when fluid moves from the inlet to the outlet of the product. There are methods for determining local hydraulic resistance caused by a change in the geometry of the passageway, based on the Weisbach formula and empirically determined local resistance coefficients. Engineering methods are proposed for determining the throughput coefficient of two types of pipeline fittings - a wedge valve and a shut-off valve. The methods are based on a well-established approach, expressed in the use of the connection of the throughput with a set of local hydraulic resistances that arise in the path of the working medium. The methods use information about the values of local hydraulic resistance values obtained empirically with the possibility of their approximation to obtain intermediate values of these indicators. The geometric features of the passage channels of the products under consideration are taken into account. They are compared with the existing nomenclature of information about the values of the coefficients of local hydraulic resistance. The proposed methods make it possible to reduce the time for carrying out calculations with obtaining a result whose accuracy is sufficient for use in engineering calculations. Expressions are obtained that allow determining the values of the throughput coefficient of the wedge gate valve and the shut-off valve, taking into account the geometric features and the relative position of the flow sections of pipeline valves, as well as the physical properties of the working medium.

Author Biographies

M. N. Karakulov, Votkinsk branch of Kalashnikov ISTU

DSc in Engineering, Professor

I. I. Holova, Trading House Votkinsk Factory Ltd

Design-Engineer

A. D. Holov, Votkinsk Factory Ltd

Design-Engineer

References

Гуревич Д. Ф. Расчет и конструирование трубопроводной арматуры. Л. : Машиностроение, 1968. 888 с.

Wang H., Chen Z., Huang J., Quan L. and Zhao B. Development of high-speed On-Off valves and their applications. Chinese Journal of Mechanical Engineering, 2022, vol. 35. DOI: 10.1186/s10033-022-00720-5.

Bojkovic A., Vermeire F.H., Kuzmanović M., Dao Thi H. and Van Geem K.M. Analytics Driving Kinetics: Advanced Mass Spectrometric Characterization of Petroleum Products. Energy and Fuels, 2022, vol. 36, pp. 6-59.

Szpica D., Kisiel M. and Czaban J. Simulation Evaluation of the Influence of Selected Geometric Parameters on the Operation of the Pneumatic Braking System of a Trailer with a Differential Valve. Acta Mechanica et Automatica, 2022, vol. 16, pp. 233-241.

Zhang D., Gao L., Zhou S., Ma Y., Li B. Measurement of the mass-flow-rate characterization parameters of high-pressure pneumatic servo slide valves. Scientific Reports, 2022, vol. 12, no. 1.

Chicherin S., Zhuikov A., Junussova L. The new method for hydraulic calculations of a district heating (DH) network. Energy, 2022, vol. 260. DOI: 10.1016/j.energy.2022.125071.

Klesse S., Wohlgemuth T., Meusburger K., Vitasse Y., von Arx G., Lévesque M., Frei E. R. Long-term soil water limitation and previous tree vigor drive local variability of drought-induced crown dieback in fagus sylvatica. Science of the Total Environment, 2022, vol. 851. DOI: 10.1016/j.scitotenv.2022.157926.

Li J., Liu Z., Liao S., Liu Q. Fully nonlinear interfacial periodic waves in a two-layer fluid with a rigid upper boundary and their loads on a cylindrical pile. Ocean Engineering, 2022, vol. 260. DOI: 10.1016/j.oceaneng.2022.112014.

Luo P., Liu L., Wang S., Ren B., He B., Nover D. Influence assessment of new inner tube porous brick with absorbent concrete on urban floods control. Case Studies in Construction Materials, 2022, vol. 17. DOI: 10.1016/j.cscm.2022.e01236.

Meng Y., Wang Q., Su W., Ye W., Chen Y. Effect of sample thickness on the self-sealing and hydration cracking of compacted bentonite. Engineering Geology, 2022, vol. 307. DOI: 10.1016/j.enggeo.2022.106792.

Tao S., He Q., Yang X., Luo J., Zhao X. Numerical study on the drag and flow characteristics of porous particles at intermediate reynolds numbers. Mathematics and Computers in Simulation, 2022, vol. 202, pp. 273-294. DOI: 10.1016/j.matcom.2022.06.001.

Voinov N.A., Zemtsov D.A., Deryagina N.V., Bogatkova A.V., Zhukova O.P. A study of diabatic distillation in a column with a low pressure drop. Chemical Engineering Research and Design, 2022, vol. 185, pp. 1-13. DOI: 10.1016/j.cherd.2022.06.033.

Wang J., Long Y., Zhao Y., Liu X., Pan W., Qu J., Shi Y. Numerical simulation of foundation pit dewatering using horizontal seepage reducing body. Scientific Reports, 2022, vol. 12. DOI: 10.1038/s41598-022-05348-y.

Barooah A., Khan M. S., Khaled M. S., Manikonda K., Rahman M. A., Hassan I., Hascakir B. Development of pressure gradient correlation for slurry flow using dimensional analysis. Journal of Natural Gas Science and Engineering, 2022, vol. 104. DOI: 10.1016/j.jngse.2022.104660.

Chang Y., Xu Q., Wu Q., Zhao X., Huang B., Wang Y., Guo L. Experimental study of the hydraulic jump phenomenon induced by the downstream riser structure in a pipeline-riser system. Chemical Engineering Science, 2022, vol. 256. DOI: 10.1016/j.ces.2022. 117687.

Chen S., Sun B., Fang H., Li Z., Tong A. Analysis of the roughness coefficient of overflow in a drainage pipeline with sedimentation.Journal of Pipeline Systems Engineering and Practice, 2022, vol. 13. DOI: 10.1061/ (ASCE)PS.1949-1204.0000668.

Coelho F.M. and De Azevedo J.P. S. Design criteria for roughness values under real sewer system operating conditions. Journal of Pipeline Systems Engineering and Practice, 2022, vol. 13. DOI: 10.1061/ (ASCE)PS.1949-1204.0000654.

Kottapalli S., Hirschberg A., Anantharaman V., Smeulders D M.J., Waterson N., Nakiboglu G. Hydrodynamic and acoustic pressure fluctuations in water pipes due to an orifice: Comparison of measurements with large eddy simulations. Journal of Soundand Vibration, 2022, vol. 529. DOI: 10.1016/j.jsv.2022.116882.

Lei Q., Zhu X., Meng Y., Cui X. On the pressure-torsion response of a flexible pipe with section ovalization. Applied Ocean Research, 2022, vol. 127. DOI: 10.1016/j.apor.2022.103297.

Su Y., Li X., Li Z., Wu X. Theoretical analysis of the flow stability of HTGR supercritical steam generators using dimensionless numbers. Nuclear Engineering and Design, 2022, vol. 394. DOI: 10.1016/j.nucengdes. 2022.111820.