ЭКСПЕРИМЕНТАЛЬНОЕ ИССЛЕДОВАНИЕ НАГРУЗОЧНОЙ СПОСОБНОСТИ СОЕДИНЕНИЙ С НАТЯГОМ ПРИ НАГРУЖЕНИИ ИЗГИБАЮЩИМ МОМЕНТОМ И ВРАЩЕНИЕМ

I V Abramov; A I Abramov; A N Sinitsyn; V V Sinitsyna

Authors

I. V. Abramov Kalashnikov Izhevsk State Technical University
A. I. Abramov Kalashnikov Izhevsk State Technical University
A. N. Sinitsyn Kalashnikov Izhevsk State Technical University
V. V. Sinitsyna Kalashnikov Izhevsk State Technical University

Keywords:

interference fit, bearing capacity, bending moment, self-disassembling

Abstract

Effect of self-disassembling of interference fit loaded with bending moment and rotation is experimentally investigated. Influence of coupling length on bearing capacity of interference fit loaded with bending moment research results are presented in this paper.

Author Biographies

I. V. Abramov, Kalashnikov Izhevsk State Technical University

; Kalashnikov Izhevsk State Technical University

A. I. Abramov, Kalashnikov Izhevsk State Technical University

; Kalashnikov Izhevsk State Technical University

A. N. Sinitsyn, Kalashnikov Izhevsk State Technical University

Kalashnikov Izhevsk State Technical University

V. V. Sinitsyna, Kalashnikov Izhevsk State Technical University

Kalashnikov Izhevsk State Technical University

References

Напряженно-деформированное состояние деталей соединения с натягом под действием изгибающего момента / И. В. Абрамов [и др.] // Вестник машиностроения. - 2010. - № 8. - С. 18-21.

Bending moment and rotating frequency influence on interference fit bearing capacity / I. V. Abramov [et al.] // University Review. - 2011. - Vol. 5. - No. 1. - P. 24-28.

Experimental plant for interference fit disassembling / I. V. Abramov [et al.] // Mechatronika-2011 : 14th International Symposium. - 2011. - P. 90-92.